speed and function selector.
- Unplug the appliance from the mains.
- Clean the appliance
CARRY HANDLE/S:
- The device has a handle on the upper part so
it can be transported easily and comfortably.
(Fig. 1).
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- When the appliance switches itself on and off
repeatedly, for reasons other than the ther-
mostat control, check to ensure that there are
no obstacles that impede correct air entry or
expulsion.
- If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
- Disconnect the appliance from the mains and let
it cool before undertaking any cleaning task.
- Clean the equipment using a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
- NB: When the appliance is used as a heater af-
ter long periods in storage or after having been
used solely as a fan a small amount of smoke
may be produced. This is not important and is
due to the heater burning dust deposits which
have accumulated on the heating element. This
phenomenon may be avoided by cleaning the
inside of the appliance beforehand through the
grill with a vacuum cleaner or pressurised air.