Devolo Magic 1 WiFi mini Instalación página 15

| EN | PLC button
Duration of the
Action
button press
1 second Start pairing with other devolo Magic adapters
(on Wi-Fi adapters: start Confi gSync)
> 10 seconds Reset devolo adapter to factory settings
PLC LED The devolo Magic WiFi mini adapter ...
... is working perfectly. It is connected to other devolo
Magic adapters.
... is currently establishing a pairing connection with
another adapter.
... is not connected to the network*
... is in standby mode.
... is currently undergoing a software update.
... has a poor Powerline connection.
... is currently in the start-up process.
... cannot see any other devolo Magic adapters.
... no longer has any LED function since it was disabled by
the user.
27
LED behaviour
Flashes white
Lights up red
LED behaviour
Lights up white
Quickly fl ashes white
Flashes red
Slowly fl ashes white
Alternately fl ashes white and red
Lights up white and then briefl y
fl ashes red
Lights up red
None
Wi-Fi button
Duration of the
Action
button press
1 second WPS function is being carried out
> 3 seconds Wi-Fi is being switched off
Wi-Fi LED The devolo Magic WiFi mini adapter ...
... has a fault-free connection to the Internet.
... is attempting to establish a connection via WPS.
... no longer has any LED function since it was disabled by
the user.
* On page 43 you will see how to carry out manual pairing.
Wi-Fi frequency range
i
This device uses only channels in the 2.4 GHz frequency range for Wi-Fi.
LED behaviour
Flashes white
LED goes out
LED behaviour
Lights up white
Flashes white
Off
28