Setting Print Conditions From Printer Driver - Olivetti Copia 9915D Manual De Instrucciones

All manuals and user guides at all-guides.com

SETTING PRINT CONDITIONS FROM PRINTER DRIVER

The setting method for items in the printer driver are described below.
Also refer to the printer driver help for more information.
Before setting the printer driver, check the following items.
G
The OLIVETTI Copia 9915D PCL6 and PCL5e printer drivers have been installed in the computer
to be used. If not, see INSTALLING THE PRINTER DRIVER SOFTWARE on page 1-6.
G
The OLIVETTI Copia 9915D PCL6 or PCL5e has been selected as the default printer on the
computer to be used.
Windows 95/Windows 98/Windows NT 4.0:
Click the Start button and then from the Settings menu item select Printers.
1
If you use Windows 95/Windows 98, right-click the OLIVETTI Copia 9915D PCL6 or
2
PCL5e icon in the Printer folder and select Properties in the menu.
If you use Windows NT 4.0, right-click the OLIVETTI Copia 9915D PCL6 or PCL5e
icon in the Printer folder and select Document defaults in the menu.
For this description, it is assumed that the mouse is configured for right hand
operation.
The properties of the selected OLIVETTI Copia 9915D printer driver will be displayed.
3
If you use Windows 95/Windows 98, click the Main tab to display the following screen.
Copia 9915D PCL 6 Properties
OK button
All driver settings which have been
selected by each tab will be saved
and the properties screen will be
closed.
* Screen on Windows 95
Cancel button
The settings which have been selected by each
tab will be canceled and the properties screen
will be closed.
However, settings which have already been
applied will not be canceled.
Defaults button
When pressed, returns the
settings which have been
selected by each tab to
their default state.
Apply button
The settings which have
been selected by each tab
will be saved.
* This button is not displayed
with Windows NT 4.0
1-15