Maintenance - iRobot Roomba 500 Serie Manual Del Propietário

Maintenance

To keep Roomba running at peak performance, it is recommended that you
perform the following maintenance regularly:
Remove and empty
1
Roomba's bin
Press button and
pull to remove bin
Clean Roomba's filter
2
compartment
A. Clean or replace filter*
B. Clean filter
compartment
*Replace filter every 2 months
Visit www.irobot.com for information on keeping Roomba running at peak performance.
TIP: Bin emptying and brush cleaning should be done after every 3-5 cleaning
cycles depending on the amount of hair, dirt, and debris in your environment.
TIP: If you notice Roomba picking up less debris from your floor, empty the bin
and clean the brushes.
Excessive build up of hair in Roomba's brushes and bearings can
permanently damage Roomba. Inspect brush bearings regularly.
Do not attempt to run Roomba without the bearings. If you misplace
Roomba's brush bearings, contact iRobot Customer Care for replacement
bearings.
20
iRobot Roomba 500 Series
All manuals and user guides at all-guides.com
Empty bin
Clean Roomba's brushes
3
A. Remove brush guard by pulling
both yellow tabs
B. Remove brush caps and use scissors
to cut any hair wrapped around the
brush. Use the Roomba cleaning tool
to comb hair from brush.
C. Remove and clean hair and dirt from
Roomba's brush bearings.
Brushes
Brush
caps
Brush
caps
Brush
bearings