Care And Maintenance Instructions - iRobot Roomba Combo j7 Guia Del Propietario

Care and maintenance

Care and maintenance instructions

To keep your robot running at peak performance, perform the
procedures on the following pages.
There are additional instructional videos in the iRobot Home App. If you
notice the robot picking up less debris from your floor, empty the Bin,
clean the Filter and clean the Brushes.
Part Care frequency
Mopping Pad Clean after a mopping job
Bin Wash Bin as needed
Filter Clean once a week (twice a
week if you have a pet) Do
not wash
Charging Contacts Clean every two (2) weeks
Full Bin Sensor Clean every two (2) weeks
Front Caster Wheel Clean every two (2) weeks
Edge-Sweeping Clean once a month (twice
Brush and Multi- a month if you have a pet)
Surface Brushes
Sensor, Camera Clean once a month
Window and
Pad Shelf
Note: iRobot manufactures various replacement parts and assemblies. If you
think that you need a replacement part, please contact iRobot Customer
Care for more information.
*Replacement frequency may vary. Parts should be replaced if there is visible wear.
Cleaning the Mopping
Pad
Hand washing
Thoroughly wash the Pad with
Replacement frequency*
warm water.
After 30 washes
Every two (2) months
Every 12 months
Every 12 months
Machine washing
Wash using the warm cycle, then
air dry. Do not tumble dry. Do not
wash with delicates.
Note: You can clean your
Mopping Pads two ways; either
by hand washing or in a washing
machine.
Roomba Combo™ j7 Owner's guide
Emptying the Bin
1
Press the Bin Release Button to
remove the Bin.
2
Open the Bin Door to empty
the Bin.
3
Place the Bin back in the robot.
EN
5