Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING & CARE
WARNING: Ensure that the appliance is completely cooled before cleaning. Remove
the temperature control dial from the socket before cleaning the product.
1.
Drain excess liquid or wipe the interior of the dual-sided hot pot surface of the
base with a paper towel.
2.
Thoroughly wipe the tempered glass lid and dual-sided hot pot of the product
with a hot, soapy cloth/sponge, ensuring that water or soap does not enter the
socket.
CAUTION: After use, do not pour cold water onto the product, as the sudden
temperature change may damage the product or create a burn hazard.
NOTE: Do not place the dual-sided hot pot, cool touch base or temperature
control dial in a dishwasher.
NOTE: Do not use bleach or abrasive cleansers/scouring pads to clean the
product, as they may damage the non-stick finish.
3.
Rinse with hot water and thoroughly dry.
4.
Ensure the socket and electrical pins are completely dry before storing or
resuming use.
5.
If cleaning the temperature control dial is necessary, wipe with a soft, damp cloth
sponge and dry thoroughly. NOTE: Do not immerse in water or place temperature
control dial in a dishwasher.
6.
Store the product in a cool, dry place.
PROBLEM
The electric dual-
sided hot pot will
not turn on and
begin heating.
POTENTIAL CAUSES
The temperature
control dial probe is not
securely connected to
dual-sided hot pot.
SOLUTIONS
Make sure the temperature control
dial probe is pushed firmly into the
port on the cool touch base. If the
problem persists, please contact
Starfrit customer
Starfrit.com/en/contact-us
7
Publicidad
Tabla de contenido
