1-5) External Terminal Connecting Method For; Video Out; Audio Out - Samsung SMO-152QN Guia Del Usuario

1-5) External terminal connecting method for CAMERA and
MONITOR
1) External terminal connecting method for CAMERA
PIR Sensor
• An additional PIR sensor or external sensor can also be connected.
• The additional PIR sensor can be connected as shown in the above graphic.
• Sensor's trigger signal is NO (Normal Open).
• Sensor is not supplied. (Sold separately)
2) VIDEO OUT BNC (1~4) terminals connecting method of monitor rear
VIDEO OUT BNC1 ~ BNC4 terminals in the rear of the monitor are VIDEO terminals for outputting
video images from OBSEVATION CAMERA to THROUGH OUT.
BNC VIDEO output terminal can be used to connect to VCR (TIME LAPSE)/DVR or SLAVE
MONITOR.
3) VCR or ALARM terminal connecting method
TIME LAPSE VCR
OR NORMAL VCR
a) Connect the VCR cable to the VCR terminal on the rear panel.
b) Connect the VIDEO OUT plug to the VIDEO IN terminal of the VCR.
c) Connect the VIDEO IN plug to the VIDEO OUT terminal of the VCR.
d) Connect the AUDIO OUT plug to the AUDIO IN terminal of the VCR.
e) Connect the AUDIO IN plug to the AUDIO OUT terminal of the VCR.
All manuals and user guides at all-guides.com
Sensor
in put
VIDEO IN

VIDEO OUT

AUDIO IN

AUDIO OUT

NOT USED
VIDEO OUT VIDEO IN
AUDIO OUT AUDIO IN
Eng-31
Camera alarm injack
b
d
f
c
a
e
E
Sensor