NuWave Brio 6Q Manual Del Propietário página 11

INSTRUCTIONS
SEAR
Sear 1 will ALWAYS be directly before regular stage
cooking and Sear 2 will ALWAYS be directly after regular
stage cooking.
Sear 1
Default sear 1 temperature is 400F and default sear 1
time is five (5) minutes (00:05).
1. Press the ON/OFF button and adjust your cooking
temperature and time for stage cooking.
2. Press the SEAR button one (1) time. This will engage
the sear 1 function.
3. The LED display will show 400F, sear, 1 (flashing),
and temp.
• Sear 1 searing temperature can be adjusted by
using the [↑] and [↓] buttons above and below the
temperature icon. 400F is the maximum searing
temperature.
• Sear 1 searing time can be adjusted by using the [↑]
and [↓] buttons above and below the time icon up to
five (5) minutes (00:05).
4. Press the START/PAUSE button to begin cooking. The
LED display will show sear 1 (flashing), time, and the set
sear time (00:05 default) with the ":" flashing.
5. Once the Sear 1 cycle is complete the unit will
automatically go into stage (regular) cooking.
6. When the unit is finished cooking the LED display will
show End and beep three (3) times.
Sear 1 & 2
Sear 1 & 2 is used to sear before and after regular
stage cooking.
1. Press the ON/OFF button and adjust your cooking
temperature and time for stage cooking.
2. If you want to set a different temperature and/or time for
Sear 1, press the SEAR button one time and adjust the
sear 1 temperature and time.
3. Press the SEAR button again. The LED display will show
400F, sear, 1, 2 (flashing), and temp.
4. Adjust the Sear 2 temperature and time if desired.
20 20
instructions
5. Press the START/PAUSE button to begin cooking. The
LED display will show sear 1 (flashing), 2, time, and the
set sear 1 time with the ":" flashing.
6. Once the Sear 1 cycle is complete the unit will beep
one (1) time and automatically go into regular stage
cooking. The LED display will show sear 2 , time, and
the set regular stage cooking time (00:15 default) with
the ":" flashing.
7. Once the stage cooking cycle is complete the unit will
beep one (1) time and automatically go into sear 2
cooking. The LED display will show sear 2 (flashing), time,
and the set sear time (00:05 default) with the ":" flashing.
8. When the unit is finished cooking the LED display will
show End and beep three (3) times.
Sear 2
Default sear 2 temperature is 400F and default sear 2
time is five (5) minutes (00:05).
1. Press the ON/OFF button and adjust your cooking
temperature and time for stage 1 cooking.
2. Press the SEAR button three (3) times. This will engage
the sear 2 function.
3. The LED display will show 400F, sear, 2 (flashing),
and temp.
• Sear 2 searing temperature can be adjusted by using
the [↑] and [↓] buttons above and below the temperature
icon. 400F is the maximum searing temperature.
• Adjust the sear 2 time by using the [↑] and [↓]
buttons above and below the time icon up to five (5)
minutes (00:05).
4. Press the START/PAUSE button to begin cooking.
5. Once the stage cooking cycle is complete the unit will
beep one (1) time and automatically go into sear 2
cooking. The LED display will show sear 2 (flashing),
time, and the set sear time (00:05 default) with the ":"
flashing.
6. When the unit is finished cooking the LED display will
show End and beep three (3) times.
21 21
nuwavenow.com nuwavenow.com