Aux In Mode; Bluetooth; Alarms And Sleep Timer - auna Connect System Manual De Instrucciones

EN
58

AUX IN MODE

Aux in mode plays audio from an external source such as an MP3 player.
To play audio with Aux in mode,
1. To avoid sudden loud volume, turn the volume low on both radio and, if
adjustable, the audio source device.
2. Connect the external audio source to the Aux in 3.5mm stereo socket.
3. To enter Aux in mode, either press Mode to cycle through the listening
modes until Aux in is displayed, or select Menu > Main menu > Aux in.
4. Adjust the volume of radio (and, if necessary, the audio source device) as
required.

BLUETOOTH

Bluetooth mode allows Bluetooth devices to pair with the radio, stream
music .To enter Bluetooth Audio mode, either press Mode to cycle through
the listening modes until Bluetooth Audio is displayed, or select Menu >
Main menu > Bluetooth.
To pair a Bluetooth device with the radio
In Bluetooth mode, on your radio press Menu > Bluetooth, this puts the
radio into discoverable mode. The Bluetooth name of the radio is Connect
System. On your Bluetooth smart device, make sure your Bluetooth is on
and scan for device select the radio from the list of available Bluetooth
devices.
Control from radio
While in Bluetooth mode you can pause, play, jump to next track and jump
to previous track (in the playlist on the controlling Bluetooth device) using
the buttons available on the radio.

ALARMS AND SLEEP TIMER

As well as clock/calendar, there are two versatile wake-up alarms with
snooze facility, and a sleep function to turn the system off after a set period.
Each alarm can be set to start in a particular mode.