Cleaning And Maintenance; Technical Specifications - Perel LEDA250NW Manual Del Usuario

4. Features

wide input voltage range: 9-30 VDC

aluminium housing

ribbed for maximum heat dissipation

stainless steel mount bracket

suited for outdoor use (IP67)

cable length: 1 m
5. Operation
1. Disconnect the existing lighting circuit from the battery. Find a suitable mounting location that will
allow running the wires and mounting the floodlight.
2. Lay out and mark where the mounting holes will be positioned. Drill appropriate-sized holes for the
mounting hardware. Before starting to drill the holes, check that nothing will be damaged while
drilling the mounting holes.
3. Mount the floodlight with the included hardware, being sure not to overtighten so you will be able to
adjust it in the final stages of the mounting procedure.
4. Connect the ground wire (black) of the floodlight to the ground wire of the lighting circuit; connect
the power wire (red) of the floodlight to the power wire of the lighting circuit.
5. Finally, aim the floodlight in the proper direction and tighten all the mounting hardware.
6.

Cleaning and Maintenance


If the protective glass is damaged, have it repaired immediately by a qualified technician. Do not use
the lamp with a cracked or broken protective glass.

Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

Check the housing cooling fins to ensure they are free from obstruction of contamination such as
excessive dust build-up. Clean with a non-abrasive cloth if needed.

Store in a clean, cool and dry place.

There are no user-serviceable parts.

Contact your dealer for spare parts if necessary.
7.

Technical Specifications

power supply
max. power consumption
LED
body colour
colour temperature
beam angle
luminous flux
dimensions (W x H x D)
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.perel.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 03 – 26/02/2016
LEDA250NW
9-30 VDC
27 W
9 x 3 W LED Epistar
black
4250 K
60°
1800 lm
108 x 135 x 59 mm
690 g
3 ©Velleman nv