Backlight - auna Connect 100 Manual Del Usuario

EN

Backlight

Adjust the brightness of the backlight. Put the device in standby mode to
adjust the backlight. You can set the time after which the backlight should
go out when you are not operating the device. Press the DIMMER button on
the remote control to reduce the backlight.
Screen
You can set the screen to color or black and white.
Power Management
You can set the device to automatically enter standby mode after a certain
time if there is no wireless connection or if you do not operate the device.
You can choose between 5, 15 and 30 minutes. You can turn off the power
saving function by selecting „Turn off".
Sleep Timer (time until automatic power off)
You can set the unit to automatically enter standby mode after a period of
time you select (15, 30, 60, 90, 120, 150, 180 minutes. A bed symbol is then
displayed in the upper right corner of the screen. Press the SLEEP button on
the remote control to go directly to this function.
62