Advanced Settings - NuWave Brio 8Q Manual Del Propietário

ADVANCED SETTINGS

Using Warm independently
Keeps your food warm until you are ready to serve.
1. Press and hold Warm for 1 second.
2. The Brio will automatically begin to warm your food at the default
temperature of 140F.
• Press Warm again to cancel the Warm function at any time.
3. You can adjust the cooking temperature and time using the Up and
Down arrows.
4. When the Brio has finished warming, it will beep 3 times and the LED
display will show "End".
Note: The maximum Warm temperature is 200F. The maximum time is 3 hours.
Using Warm with Menu
Select your preset and have the Brio warm your food.
1. Press Menu.
2. Select your desired preset (1-100).
3. Press Warm.
4. Adjust the Warm temperature and time by pressing Stage and using the
Up and Down arrows.
5. Press START/PAUSE to begin cooking.
• You can adjust the Warm temperature and time at any time.
• Press WARM at any time to cancel.
Stage
The Stage function gives you the ability to cook your food at different
temperatures throughout the cooking process. You can define up to five 5
different cooking stages. The default for Stage 1 is 350°F for 15 minutes, and
350°F for 0 minutes for all subsequent stages.
Example: You can set your food at 400F for 10 minutes, have it switch to
350F for 20 minutes, and then have the Brio cook at a lower temperature
for the remainder of the cooking process.
1. Press Stage. This is Stage 1.
2. Adjust the cooking temperature and time.
3. Press Stage again to add Stage 2.
4. Adjust the cooking temperature and time.
350F
1800
nuwavenow.com
1
17