Team kalorik TKG SVC 1000 Manual De Instrucciones página 12

ASSEMBLING AND CARPET SHAMPOO FUNCTION
Note : Before using the shampoo function, check the color resistance of your carpet or
armchair etc. in a hidden corner.
• Operate your machine by using the ON-OFF switch.
• Use the Max. option for the adjustable speed control switch.
• Turn on the switch for shampoo delivery pump.
• As illustrated in the figure, pull the trigger to spray the shampoo water on the floors
you want to clean.
• Stop pulling the trigger after spraying enough water.
• Always clean by pushing back the shampoo nozzle, in order to vacuum dirty water
back into the tank.
Warnings :
• Always use the original and non-foaming carpet cleaning shampoo.
The warranty is not valid if unsuitable spare parts or carpet cleaning shampoo are
used in any way.
• Do not leave residual soapy water or dirty water into the tank after use. This will
cause bad smell.
• Always turn off the pump switch when there all the water with shampoo has been
used up.
TKG SVC 1000
Hard floor and window cleaning function
Insert the hard floor and window nozzle on the carpet
shampoo nozzle.
Upholstery cleaning function
Insert the upholstery shampoo nozzle directly into the
elbow tube with spray trigger. Insert the tip end of the
upholstery shampoo nozzle (B) into the junction (A) on
the elbow tube, locking in clockwise direction.
12