ASSEMBLY FOR DRY VACUUMING FUNCTION WITH SMS DUSTBAG AND CLOTH DUSTBAG
•
Unlock the locking latches by pulling outwards.
•
Put the motor bonnet away by holding it using the carrying handle.
•
Lock the SMS dustbag to the clips which are on the back side of the suction mouth.
•
Put the cloth dustbag into the tank.
Note: While using the dry vacuuming function, use the cloth and paper dustbag
together.
•
Put the motor bonnet back on the tank by holding it using the carrying handle and
lock the latches.
•
Insert the flexible hose into the suction mouth.
•
Put the hose into the suction mouth and the desired accessory for dry vacuuming.
•
Clean the surface by moving the accessory forward and backward.
USING THE AIR FILTRATION UNIT
•
Unlock the locking latches by pulling outwards.
•
Put the motor bonnet away by holding it using the carrying handle.
•
Put the water filter exhaust inside the tank by pushing it into the suction mouth.
•
Fill the water tank to the correct minimum and maximum water level.
•
Put 4-5 drops of room perfume on the sponge filter.
•
Put the motor bonnet back on the tank and lock the latches.
•
Plug the tubes and the desired accessories into the suction mouth.
•
Plug the cord into the power socket.
•
Operate your machine using the ON-OFF switch.
Note : Turn off the pump switch for air filtration unit.
TKG SVC 1000
14