Anker PowerConf S500 Manual Del Usuario página 7

AnkerWork App
Download the AnkerWork app to enhance your experience.
• Check product information
• Read user manual
• Check battery level
• Check for the latest firmware updates
• Adjust volume
• Set auto-power off
• Manage devices
• Turn LED light bar off
• Set voice pickup modes
There are two voice pickup modes you can choose from in the AnkerWork app.
• Standard mode: Pick up all sounds from the near end.
• Broadcasting mode: Restore and deliver original sounds by turning the speaker
off. You will not hear the far end anymore when in this mode. (You are strongly
suggested to use this mode via USB connection).
Linking Mode
Linking mode is available only when you connect one PowerConf S500 with your PC
using the USB-C cable. It is not available when connected via Bluetooth.
1. Connect one PowerConf S500 with your PC using the provided USB-C cable.
2. Power on another PowerConf S500, then press the link button on both PowerConf
S500 speakerphones simultaneously to enter linking mode.
Connecting
05 EN
AnkerWork
ANKERWORK
Connected
2s