Anker PowerConf S500 Manual Del Usuario página 8

Press
Flashing cyan
Steady cyan
• This mode is not available when both PowerConf S500 speakerphones are
connected via a USB cable.
• The recommended distance between the two PowerConf S500 speakerphones
is about 3 m.
• To exit linking mode, press and hold the link button for 2 seconds simultaneously
on both PowerConf S500 speakerphones.
Specifications
Specifications are subject to change without notice.
Input
Rated output power
Battery capacity
Charging time
Talktime
Driver size
Frequency response
Voice pickup range
Microphone
Bluetooth version
Bluetooth range
Enter linking mode
Connecting
Connected
5V
2A
10W
6700 mAh
4 hours
16 hours
1 x 1.75" (full range)
20 Hz - 20 kHz
5 m / 16 ft
4 stereo microphones
5.0
10 m / 33 ft
EN 06