auna Connect CD MKII Manual De Instrucciones página 70

EN
70
Standby level
1. Press and hold the Menu button on main unit or remote control and turn
and press the NAVIGATE dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' >
'Backlight'.
3. Turn and press the NAVIGATE dial to choose 'Standby Level'.
4. Turn and press the NAVIGATE dial to choose between 'Medium', 'Low'.
Carrying out a factory reset
Resetting removes all presets, stored stations, alarms and resets all other
options to default settings.
1. Press and hold the Menu button on main unit or remote control and turn
and press the NAVIGATE dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to choose 'System settings' > 'Factory
Reset'.
3. Turn and press the NAVIGATE dial to select 'Yes' to reset factory settings.
Select 'No' if you do not want to reset to factory settings.
DAB settings
Manual tuning
To manually check the signal strength of a known channel:
1. Press and hold the Menu button on main unit or remote control and turn
and press the NAVIGATE dial to select 'Main Menu.
2. Turn and press the NAVIGATE dial to choose 'Manual tune'.
3. Turn and press the NAVIGATE dial or use the < OK > buttons on
the remote control to choose the channel that the radio station is
broadcasting on.
4. Press the Menu button to return to the main menu.
Prune invalid
To remove inactive stations from the station list:
1. Press and hold the Menu button on main unit or remote control and turn
and press the NAVIGATE dial to select 'Main Menu.
2. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control to choose 'Prune invalid'.
3. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control to choose 'Yes'.will remove all inactive stations from the
station list.