Options And Settings - auna Connect CD MKII Manual De Instrucciones

OPTIONS AND SETTINGS

Press and hold the Menu button on main unit or remote control to access
the Settings menu.
Setup wizard
1. Press and hold the Menu button on main unit or remote control the
Settings menu.
2. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control to select 'Main menu' > 'System settings' > 'Setup
Wizard'.
3. To run the setup wizard now, turn and press the NAVIGATE dial to select
'YES'. To set up later, turn and press the NAVIGATE dial to select 'NO'.
4. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control to choose between a 12 or 24 hour time format.
5. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control to select the method that you want to use for updating
time. You can choose to update the time based on the 'DAB' or 'FM' radio
signal or you can update time from your network. To disable automatic
time updates, choose 'No update'.
6. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control or use the < OK > buttons on the remote control to set
the day of the month. Repeat to set the month, year, hour and minutes.
7. If you have set your use the 12 hour time format, turn and press the
NAVIGATE dial or use the < OK > buttons on the remote control to
choose the 'AM' or 'PM' version of the hour.
8. To set up so that you can use the Pure Select app to take out of standby
('Keep network connected'), turn and press the NAVIGATE dial to choose
'YES'. If you want to disable this feature to save power, turn and press
the NAVIGATE dial to choose 'NO'.
9. Will display a message to tell you that the Setup wizard has completed.
10. Press the NAVIGATE dial to exit the Setup wizard.
Helpful hint: Your Wi-Fi key is case sensitive, make sure to enter it exactly
as shown.
EN
63