Bt Operation - auna iTuner CD Manual De Instrucciones

BT OPERATION

The unit has a BT function that can receive a signal within 8 metres.
Pair the unit with a BT device to listen to music:
1. Press MODE button on unit or remote control to select BT Audio mode.
2. If the unit is not paired with any BT device, the BT logo will start to flash
to show the unit in pairing mode.
3. Activate your BT device and select the search mode.
4. "iTunerCD" will appear on your BT device list.
5. Select "iTunerCD" and enter "0000" for the password if necessary. Once
connected the BT logo on the screen will stop flashing. Your device is
now paired with the unit.
6. Pressing and hold PRESET button on unit or remote control or pressing
PAIR button on remote control can disconnect existing BT connection,
with other BT devices able to locate and make connection with the unit.
7. To disconnect the BT function, switch to another function on the unit or
disable the function from your BT device.
Playing Music via BT
You may need to adjust the volume on your radio and BT device.
⏯
Press the button on the unit or on the remote control to play/pause music
⏮ / ⏭
or press buttons on unit or remote control to skip to the previous/
next track.
Notes:
• The operational range between the unit and the device is approximately
8 metres.
• If the signal strength is weak, your BT receiver may disconnect, but it
will re-enter pairing mode automatically.
• For better signal reception, remove any obstacles between the unit and
the BT device.
• Compatibility with all devices and media types is not guaranteed.
• Some mobile phones with the BT function may connect and disconnect
as you make and end calls. This is not an indication of a problem with
your unit.
EN
71