Layout And Items Supplied; Proper Use; Technical Data - Parkside PDMH 4500 A2 Manual De Instrucciones

•
Do not exceed the maximum permissible ope-
rating pressure.
•
Do not carry compressed air tools by their
hoses.
Keep this safety information in a safe
place.

3. Layout and items supplied

3.1 Layout (Fig. 1/2)
1. Cylinder
2. Trigger lever
3. Air regulation screw
4. Nipple
5. Tensioning spring
6. Flat chisel (universal chisel)
7. Pointed chisel
8. Rivet parting chisel
9. Parting chisel (sheet-metal chisel)
10. Spot-weld parting chisel
1 1. Special compressed air oil
3.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material
are not toys. Do not let children play with
plastic bags, foils or small parts. There is
a danger of swallowing or suffocating!
•
Air chisel hammer
•
Nipple
•
Tensioning spring
•
Chisel set (5 chisels)
•
Special compressed air oil
•
Original operating instructions
Anleitung_4139034_LB5.indb 45 Anleitung_4139034_LB5.indb 45
GB/MT

4. Proper use

The chisel hammer is a pneumatically operated
tool for versatile use. It is suitable for example
for making slits, for removing tiles or plaster, for
making holes through masonry, for cutting sheet
metal and for removing bolts or rivets.
The equipment is designed for indoors use only.
The exhaust air escapes from the housing to the
front.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufactu-
rer will be liable for any damage or injuries of any
kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
Only allow repairs and services to be carried out
by authorized professional repair shops.
Remember.
Too small a diameter of the hose and too
long a hose line will result in loss of po-
wer.

5. Technical data

Max. permitted operating pressure: ..........6.3 bar
Air consumption at
4.0/6.3 bar .... approx. 250/approx. 460 l/min
Chisel mounting (hexagon): ..................... 10.2 mm
Stroke: ............................................................44 mm
Blow rate: ............................................. 4,500 min
Recommended hose diameter: ................Ø 10 mm
Weight: ..........................................approx. 1.05 kg
- 45 -
-1
04.03.13 13:34 04.03.13 13:34