Using Accessories; Using The Blow-Out Gun; Maintenance And Cleaning; Disposal - Parkside PDSS 13 D4 Traducción Del Manual De Instrucciones Origina

Using accessories

♦ Press the lever of the valve connector
plug in desired accessory
valve connector

Using the blow-out gun

♦ Screw an extension nozzle
compressed air blow-out gun
♦ Press the trigger
♦ Release the trigger
♦ Disconnect the product from the compressor
after completing your work.
NOTE
► Disconnect the hose from the compressor
before removing the supply hose from the
product. This will prevent the supply hose
from thrashing around in an uncontrolled
manner.

Maintenance and cleaning

WARNING! RISK OF INJURY!
Disconnect the product from the
compressed air supply before
cleaning it.
■ The product does not require any special
maintenance.
■ Do not use any sharp objects to clean the
product. Do not allow any liquids to get into
the product. Otherwise the product could be
damaged.
■ Clean the product regularly, preferably immedi-
ately after use.
■ Clean the housing with a dry cloth.
PDSS 13 D4
and
to into the
.
onto the
.
to start the air flow.
to stop the air flow.

Disposal

This disposal is free of charge for the user.
Protect the environment and dispose of this
tool properly.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
The packaging materials have been
selected for their environmental friend-
liness and ease of disposal and are
therefore recyclable. Dispose of pack-
aging materials that are no longer
needed in accordance with applicable
local regulations. Dispose of the pack-
aging in an environmentally friendly
manner.
Note the labelling on the packaging and separate
the packaging material components for disposal if
necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the follow-
ing meanings: 1–7: Plastics, 20–22: Paper and
cardboard, 80–98: Composites.
GB │ MT │ 29 ■