Using The Appliance - HOMCOM 800-119V70 Manual De Instrucciones

Before first use
1. Remove all packaging materials.
2. Remove any stickers or labels from the appliance.
3. thoroughly clean the basket and pot with hot water, some washing-up liquid and a non-
abrasive sponge.
4.Wipe inside and outside of the appliance with a moist cloth.
This is an oil-free fryer that works on hot air, do not fill the pot with oil or frying fat directly.
Notice: When your air fryer is heated for the first time, it may emit slight smoke or odor.
This is normal with many heating appliances. This does not affect the safety of your
appliance.
Preparing for use
1. Place the appliance on a stable, horizontal and even surface.
Do not place the appliance on non-heat-resistant surface.
2. Place the basket in the pot (Fig.3).
Do not fill the pot with oil or any other liquid.
Do not put anything on top of the appliance, the airflow will be disrupted and affects the
hot air frying result.

USING THE APPLIANCE

The oil-free can prepare a large range of ingredients.
Hot air frying
1. Connect the mains plug into an earthed wall socket.
2. Carefully pull the pot out of the Hot-air fryer (Fig.6)
3. Put the ingredients in the basket. (Fig.5)
4. Slide the pot back into the Hot-air fryer (Fig 4)
Never use the pot without the basket in it.
Caution: Do not touch the pot during and sometime after use, as it gets very hot.
Only hold the pot by the handle.
5.Determine the required preparation time and temperature for the ingredient (see
section 'Settings' in this chapter).
6.Some ingredients require shaking halfway through the preparation time (see section
"Settings" in this chapter). To shake the ingredients, pull the pot out of the appliance by
the handle and shake it. Then slide the pot back into the air fryer
Tip: If you set the timer to half the preparation time, you hear the timer bell when you
have to shake the ingredients. However, this means that you have to set the timer again
to the remaining preparation time after shaking.
EN