Important - MIRKA AIROS Manual

en (original)
Declaration of incorporation for partly completed machinery
In accordance with the EU Machinery Directive 2006/42/EC, Annex II, sub.B for partly completed machinery.
Manufacturer: Mirka Ltd
Address: Pensalavägen 210, 66850 Jeppo, Finland
Person established in the community authorised to compile the relevant technical documentation: Annika Stenmark, Mirka Ltd
Description and identification of the partly completed machinery
Product / article: Mirka® AIROS 150NV, 350CV, 350NV, 550CV, 550NV, 650CV, 650NV
Product / article: Mirka® AIROP 312NV
Product / article: Mirka® AIOS 130NV, 353CV
Function: Finishing tool
The following essential requirements of the Machinery Directive 2006/42/EC have been fulfilled: 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.3.7, 1.5.1,
1.5.4, 1.5.5, 1.5.9, 1.5.13
The relevant technical documentation is compiled in accordance with part B of Annex VII.
Applicable Harmonized Standards: EN 62841-1:2015, EN 62841-2-4:2014
The partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared
in conformity with the provisions of the Machinery Directive 2006/42, where appropriate.
Jeppo 26.03.2021
Place and date of issue

Important

Read these safety and operating instructions carefully before installing, operating or maintaining this tool. Keep these
instructions in a safe and accessible place. Read and comply with state and local regulations.
Required personal safety equipment
Read
operator's manual
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage.
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage.
WARNING
Read all safety warnings and all instructions. All operators must be fully trained in the proper, safe use of the tool. Do not
allow persons unfamiliar with the tool or these instructions to operate the tool. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
Wear
safety glasses ear protection
Stefan Sjöberg, CEO
Wear Wear
safety gloves
Wear
face mask
Mirka® AIROS, AIROP & AIOS
23