Edenwood 972466 Instrucciones De Uso página 57

B
Product usage
NOTE: When you turn on the keyboard for the first time, the touch function will
be automatically activated.
RECORDING AND RYHTHM PROGRAMMING
You can record notes on the keyboard. The recorded notes or rhythms are automatically deleted
when you record again or turn off the keyboard.
Recording
• Press REC to turn on this function. Record will be displayed on the LED screen. All notes
played will be recorded and saved.
• Press PLAY to start or stop recording playback.
• Only one recording can be saved at a time.
• Full will be displayed on the LED screen whenever the memory is full, and the recording
will stop. Up to 239 notes or 32 programmes (keyboard percussion) can be saved.
• One a melody has been recorded, you can assign the sounds of the saved memory settings
to the recording by pressing M1, M2, M3 or M4, then PLAY (before the assigned memory
number disappears from the display, or within approx. 3 seconds). Press PLAY again to
stop playback.
• Press REC again to turn off this function and delete all recorded notes.
Rhythm programming
• Press PROG to turn on this function. Program will be displayed on the LED screen. Press
the keys to play the percussion instruments in your desired rhythm. All percussion sounds
will be recorded and saved up to a maximum of 32 key presses.
• Full will be displayed on the LED screen whenever the memory is full, and the recording
will stop.
• Press PLAY to stop recording and playback the programmed rhythm. Press PLAY again
to stop playback.
• Only one program can be recorded at a time.
• To delete a recorded programme, you can either record a new programme to overwrite
the previously recorded programme, or turn off the keyboard via the ON/OFF button.
MEMORY
You can save up to 4 tone, rhythm or tempo settings that can be used when playing the keyboard.
• Adjust the tone, rhythm and tempo. Then simultaneously press MEMORY and one of the
M1-4 buttons to save the settings and assign them to an M1, M2, M3 or M4 button. Saving
will be displayed on the LED screen.
• To use a saved setting, press M1, M2, M3, or M4, then play the keyboard to use the saved
settings.
• At any time, you can stop using the saved settings and select different sounds via the
numeric keypad.
• To delete a saved setting, you can either save a new setting to overwrite the existing one,
or turn off the keyboard via the ON/OFF button.
56 EN