Product Usage; Before First Use - Edenwood 972466 Instrucciones De Uso

B

Product usage

Before first use

Connecting the AC adapter
• Check the keyboard's rating plate matches the mains power socket voltage.
• Plug the AC adapter's jack plug into the adapter's AC socket on the rear panel.
• Plug the other end of the AC adapter into the mains power socket.
Assembly
NOTE:
• Never use excessive force during assembly or when tightening screws or
bolts, as this may damage the product.
• We recommend that you lay out all the parts next to the assembly area.
To assemble the stand, find a level, stable floor area. You will need the following (tools are
not provided):
• Approximately 15 minutes for assembly
• A minimum of 2 people
• Adjustable spanner
• 2m² space
Attach the leg B to the foot A using the 32 mm bolts L (x2) and nuts M (x2). Tighten with
an adjustable spanner to secure the nuts into place. Repeat to assemble the other leg.
On the T-bracket C there are 4 holes that enable you to assemble the stand at different
heights. Choose the desired height and then align the holes on the leg B with the T-bracket
C and the panel G. Insert the 32 mm bolts J (x2) and screw in until they are securely
fastened into place. Repeat to attach the other side.
Attach the keyboard-supporting platform D onto the T-bracket C by means of the 32 mm
bolts J (x4). Rest the keyboard E on the keyboard-supporting platform D and secure it in
place via the 25 mm bolts K (x2).
Slot the music stand F into the slots on the top of the keyboard E.
Connections
IMPORTANT! Make sure the keyboard is turned off before connecting it to external
devices. Once the external device is connected, make sure the volume on the
external device is low, then turn on the power.
48 EN