Security - Greenlee Mobile Bending Table for 881 Hydraulic Bender Manual De Instrucciones

Security

The MBTS has security features to secure bending
accessories when transporting or storing. The padlock
pockets are identified by the lock cutout on the cart.
The latches are for No.1 or No. 5 Master Lock or
equivalent sized padlocks, not included with purchase.
• The 3 in., 3-1/2 in. and 4 in. shoes are locked by
sliding the plate with hooks over the shoes and
padlocking at the front. (Fig. 17)
Sliding Plate
Figure 17
• The 2-1/2 in. shoe, Yoke, Ram Positioner and all
Saddles have a hinged plate that folds over them and
padlocks towards the middle near the rear fork tube.
(Fig. 18)
Hinged Plate Padlock
Figure 18
14
•
When not in use padlocks can be hung or locked on the
three holes (Fig. 20) in front of the misc. storage shelf.
Padlock
© 2021 Greenlee Tools, Inc.
Follow bars and any items in the Misc. storage shelf
(such as pins) are secured by swinging the forward
tray downwards and padlock through the slot in the
tray. (Fig. 19)
Figure 19
Figure 20
881MBTS
Padlock
Padlock
Storage
52094216 REV 0