Commissioning (B); Fill Tank (C); Operating (D); Nozzle Capacity (E) - Rothenberger ROSANI Clean 15 Instrucciones De Uso

5.4 Commissioning
 Screw hose onto air chamber.
 Screw hose onto trigger valve.
 Screw spray tube onto trigger valve.
 Push in battery.
5.5 Fill tank
Check charge status on the battery!
 Always use tank strainer fill in 2/3 of the amount of water.
 Add liquid concentrate.
Powder must have dissolved completely!
 Fill up with water.
 Check gasket ring. Close tank.
Only use the amount of substance required.
Observe manufacturers mixing instructions.
5.6 Operating
 Set pressure.
 Check charging condition.
Wait until the pump switches off.
 Spray
The integrated pressure sensor regulates the pump speed and switches the pump on and off.
5.7 Nozzle capacity
 Spraying - 0 turn
 Jet - 2 turns
5.8 Shut-down
Dispose in a correct way of residue and according to the manufacturer's indications.
 Empty, rinse with clean water.
 Set max. Pressure, spray until no more liquid comes out.
Nozzle setting: Jet.
 Fill with clear water, switch on the device (max. pressure), spray until no more liquid comes
out.
 Clean nozzle.
Do not use hard objects.
Do not blow through with your mouth: risk of poisoning!
 Always store tank empty, open and protected from frost.
If not in use for a longer period of time: store the fully charged battery separately from the appli-
ance.
Park position:
a: Spray tube holder
b: Nozzle holder
ENGLISH
(B)
(C)
(D)
(E)
(F)
15