Care And Maintenance; Troubleshooting; Customer Service; Disposal - Rothenberger ROSANI Clean 15 Instrucciones De Uso

6

Care and Maintenance

ROSANI Clean 15:
Check and clean regularly, if necessary replace:
 All gaskets.
 Filters (trigger valve, suction hose).
 Nozzle.
Charger:
Repairs to the charger must only be carried out by qualified electricians.
If the mains connection cable of this tool is damaged, in order to prevent endangering personnel
and property it must be replaced by the manufacturer, or the Customer Service of the manufac-
turer, or a similarly qualified person.
7

Troubleshooting

Symptom
Motor is running, no pressure
Motor is running, pressure / poor spray
pattern
Motor not running
Leaking
If the fault cannot be remedied, contact your service point. Maintenance and repair works may
only be carried out by trained staff or specialist dealers and exclusively with ROTHENBERGER
original parts.
8

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RO SERVICE+
online: ℡ + 49 (0) 61 95/ 800 8200
www.rothenberger.com
9

Disposal

Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
Old batteries can be taken to your specialist dealer who will dispose of them in conformity with
environmental regulations.
For EU countries only:
Do not dispose of electric tools with domestic waste. In accordance with European
Directive 2012/19/EU on waste electrical and electronic equipment and its implementa-
tion as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.
Solution
Release pressure at the trigger valve
Clean / replace filter
Clean / replace suction hose
Charge battery pack
Replace fuse
Check electrical connections
Tighten screws
Squeeze cable clips to fit
Replace gasket
+ 49 (0) 61 95/ 800 7491  service@rothenberger.com -
ENGLISH 17