Cleaning; Troubleshooting; Accessories - Rothenberger RODIA DRY CLEANER 1600 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
Contaminated items:
When carrying out maintenance or repair work, all contaminated items which have not been ad-
equately cleaned must be disposed of. Such items must be disposed of in impermeable bags in
accordance with the applicable regulations concerning the disposal of such waste.
Testing the effectiveness of the vacuum cleaner:
There must be an adequate air exchange rate L in the room if the exhaust air returns to the
room. Further information can be taken from your national regulations. If the suction of the vacu-
um cleaner reduces and the cleaning procedure of the folding filter cassettes increases, the suc-
tion performance is not adequate (provided that the container is empty and the fleece filter bag
has been replaced) then it is necessary to replace the folding filter cassettes.
5

Cleaning

Acids, alkalis and solvents can corrode the vacuum cleaner parts.
 Clean the container and accessories with water.
 Wipe the top section with a damp cloth.
 Allow the container and accessories to dry
6

Troubleshooting

Malfunctions cannot always be traced back to defects in the vacuum cleaner!
Fault
Reduction in suction
Vacuum cleaner will not
start
The vacuum cleaner does
not start when the tool is
switched on in the >RA<
mode
No other "interventions" are permitted; please consult the servicing workshop.
7

Accessories

You can find suitable accessories in the main catalog or at www.rothenberger.com
20
Possible cause
Filter contaminated
fleece filter full
Container full
Nozzle, pipes or hose blocked
Mains plug plugged in?
Mains power missing?
Mains cable OK?
Cover closed properly?
Water sensor switched off?
Vacuum cleaner in readiness
for operation "RA"?
Is the mains plug of the unit in
the plug socket?
Solenoid valve of compressed
air automatic switch-on con-
taminated?
ENGLISH
Remedy
Clean.
Change.
Empty.
Clean.
Set to "I" (see "Display and
Operating Elements")
Put the mains plug in the
vacuum cleaner plug socket
Flush the compressed air
automatic switch-on with
alcohol

Publicidad

Tabla de contenido
loading

Tabla de contenido