Danby DCR045B1SLDB Manual Del Propietário página 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in to avoid damage to the internal components.
Ensure that the rubber gaskets on the doors are making a good seal with the cabinet all the way around
before tightening the hinge screws.
1. Remove the upper hinge cover and the upper hinge
from the top right side of the cabinet. Remove
the screw hole cover from the top left side of the
cabinet. Remove the freezer door from the cabinet.
2. Remove the center hinge from the cabinet. Remove
the refrigerator door from the cabinet.
3. Remove the hinge hole covers from the top left side
of the refrigerator and freezer doors and install
them on the top right hand side of both doors.
Remove the screw hole covers from the center left
side of the cabinet and install them on the center
right side of the cabinet. Detach rubber gaskets
from the refrigerator and freezer doors, rotate them
180° and then reattach them.
4. Remove the adjustable foot from the bottom left side
of the cabinet. Remove the lower hinge from the
bottom right side of the cabinet.
5. Unscrew the hinge pin and remove it from the lower
hinge.
6. Flip over the lower hinge.
7. Reinstall the hinge pin.
8. Install the lower hinge on the bottom left side of the
cabinet. Install the adjustable foot on the lower right
side of the cabinet. Install the refrigerator door on
the cabinet.
9. Flip the center hinge over and install it on the left
side of the cabinet.
10. Install the freezer door on the cabinet. Install the
upper hinge on the top left side of the cabinet.
Install the screw hole cover on the top right side of
the cabinet.
1
3
5
7
9
5
2
4
6
8
10