ARTE confort ITAPARICA Manual De Instrucciones página 18

REMOTE CONTROL SYNCHRONIZATION
The remote control is synchronized from the factory, you only need to re-synchronize it if the
synchronization has been lost, if you purchased a new one or want to control several fans with a single
remote.
A REMOTE CONTROL TO A NEW FAN
1. Cut the current
EN
Be sure to cut off the current until the fan stop.
2. Restore the current
Re-establish the current.
3. Synchronize the remote control
Within 5 seconds, press the "FAN ON/OFF"
button for a few seconds until you hear the signal.
Control range: 8-10m.
18
A REMOTE CONTROL TO VARIOUS FANS
1. Cut the current
Be sure to cut off the current until all fans stop.
2. Restore the current
Re-establish the current.
3. Synchronize the remote control
Within 5 seconds, press the "FAN ON/OFF"
button on each fan for a few seconds until you
hear the signal. If they are within a radius of
less than 10m (control range: 8-10m), all will
synchronize at the same time.