Basic Operation - DeWalt DCT410 Manual De Instrucciones

4. Press the OK button to save changes (field turns yellow).
5. Repeat above steps to change remaining fields.
6. Press the main menu button to exit.

BASIC OPERATION

NOTE: At any time during the camera operation, pressing the main
menu button will return to the previous menu.
To Record Photos or Videos
Be sure a micro SD card (sold separately) is loaded in the card slot (H).
1. Turn both the camera (B) and the handle set (G) on.
2. Aim camera at destination.
A. Press the camera button (L) to take a photo. A confirmation icon
will appear in the top right side of screen.
OR
B. Press the record button (M) to start recording.
A red dot will appear in the top right side of the screen.To stop
recording, press the record button again.
The camera will create a folder on the micro SD card for that day. All
photos or videos taken that day will be stored in this folder.
To View Photos or Videos
1. Press the main menu button to show the Main Menu.
2. Press the forward or back arrow to select the Folder option.
3. Press the OK button to navigate to the next screen.
4. Press the forward or back arrow to select a dated folder.
5. Press the OK button to select the dated folder.
6. Press the forward or back arrow to select the photo or video.
12