Operating Tips - DeWalt DCT410 Manual De Instrucciones

To Format Micro SD Card
NOTICE: Formatting the micro SD card will erase all data.
1. Press the main menu button to show the Main Menu.
2. Press the forward or back arrow to select the Format Disk option.
3. Press the OK button to navigate to the next screen.
4. Press the forward or back arrow to select NO or YES.
5. Press the OK button to save changes and exit.
To Change Default Setup
NOTICE: Changing to default setup will erase current settings
and restore factory settings.
1. Press the main menu button to show the Main Menu.
2. Press the forward or back arrow to select the Default Setup
option.
3. Press the OK button to navigate to the next screen.
4. Press the forward or back arrow to select NO or YES.
5. Press the OK button to save changes and exit.

Operating Tips

• Use only D WALT 12V Max* lithium ion battery.
E
• Ensure the D WALT battery is in good working condition. If the low
E
battery indicator light on the screen is flashing, the battery needs
to be recharged.
• To extend battery life, make sure to turn both the screen and the
handle set off when not in use.
• Make sure the screen is fully charged before operation.
16