Kinderkraft MOVI Manual De Instrucciones página 21

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
Travel cot is ready for use, only when the locking mechanisms are engaged.
Check carefully that they are fully engaged before using the folding travel cot.
The lowest position of the base is the safest. When the child starts sit alone, is
advised to use only this base level.
If you leave the child in the cot unattended, always check, if the side entrance
is fastened with a zip.
All assembly elements and fittings should be tightened properly and checked
regularly and retightened as necessary.
To prevent injury from falls, if the child is able to climb out of the cot, the cot
shall no longer be used for that child.
WARNING — Only use the mattress sold with this cot, do not add a second
mattress on this one, suffocation hazards.
PLAYPEN – WARNING:
Do not place the playpen close to an open fire or other heat source.
Do not use the playpen without the base.
Ensure that the playpen is fully erected and all the locking mechanisms
engaged before placing your child in this playpen.
Maximum age of child for which the playpen is intended – 36 months.
The base should always be used in the lowest position as soon as the child is
old enough to sit, kneel or to pull itself up.
Accessories which are not approved by the manufacturer shall not be used.
Do not leave anything in the playpen or place the playpen close to another
product, which could provide a foothold or present a danger of suffocation or
strangulation, e.g. strings, blind/curtain cords.
1
2
All assembly fittings should always be tightened properly.
Do not use the playpen if any part is broken, torn or missing and use only spare
parts approved by the manufacturer.
If you leave the child in the playpen unattended, always check, if the side
entrance is fastened with a zip.
1. Installing the cot with mattress on the upper level (Fig. I)
Take the cot out of the bag. Pull up the short sides of the frame to unfold the cot (Fig. A).
Place the plastic feet into the cot legs (fig. B). Connect the cot legs with the cot frame (fig. C),
a characteristic click will indicate a correct assembly. Then attach the fabric clips to the foot
Cot frame
Legs x4
3
Plastic legs x4
4
21
Mattress

Publicidad

Tabla de contenido
loading

Tabla de contenido