Handling
∙ Place the processing bowl on the slip
protection.
∙ Caution: Exercise extreme care: the
blades are very sharp. When handling
the blades, always hold them by the
upper protective plastic covering.
∙ Cut the material to be sliced into pieces
of approximately 1-2 cm.
∙ Fit the cutting blade unit into the bowl
before filling the bowl with the food to be
chopped.
∙ Avoid overfilling the working tank! The
processing bowl may be filled with herbs
etc. up to the MAX mark.
∙ Do not fill with hot liquids or hard foods
(e.g. ice cubes, nutmegs, cereals, coffee
beans, rice or spices). Hard cheese or
chocolate is also unsuitable.
∙ Close the processing bowl with the lid
and lock it by turning clockwise.
∙ Put the drive unit on the lid of the
processing bowl. Lock by turning so that
and
face each other.
∙ Plug in the mains plug and press the
turbo button in short intervals until the
material to be sliced has reached the
desired fineness. Hold the lid and the
processing bowl.
∙ After chopping, first pull out the mains
plug before opening the lid or removing
the drive unit. To loosen the drive unit,
turn it until
and
Unlock the lid, remove it and take out
the blade and the food to be sliced.
face each other.
∙ When processing further food after the
first cycle, make sure that the receptacle
for the blade unit at the bottom of the
bowl is free of food residue before
refitting the unit.
Disposal
Devices marked with this symbol
must be disposed of separately
from your household waste, as
they contain valuable materials
which can be recycled. Proper disposal
protects the environment and human
health. Your local authority or retailer can
provide information on the matter.
9