Audizio TOULON Manual De Instrucciones página 8

In case of playback with the folder mode on, press the FOLDER -/+ buttons, and the folder can be selected even though it is in
playback/pause mode. It will continue playback/pause mode in the 1st track of the selected folder.
TO PLAY BACK USB/MP3 PLAYER WITH FOLDER
1. Press the SOURCE button on the remote control or on the main unit to select the USB function. Connect the USB memory
device that contains playable MP3 format files. When the USB memory is connected to the main unit, the device
information will be displayed.
2. Press the FOLDER -/+ button to select desired playback folder.
3. Select desired file to be played back by pressing the
4. Press the PAUSE/PLAY button. Playback will start and the file name will be displayed.
NOTE:
This product is not compatible with MTP and AAC file systems from USB mass storage devices or MP3 players.
This unit supports FAT16 and FAT32, but some USB storage media may not support both file systems. For details, refer to the
operation manual of the USB storage device in question or contact the manufacturer.
SKIP AND SEARCH MODE
1. During playback or pause mode, press the SKIP NEXT
the beginning of the current track.
2. During playback, press and hold the
NOTE: The following is only functional by using the remote control.
Press the REPEAT button on the remote control to select different repeat play modes when a CD is playing:
Repeat 1 Repeat All Normal
  
REPEAT 1 - the track currently playing will repeat continuously. "REPEAT 1" appears on the display.
REPEAT ALL - all tracks will repeat continuously. "REPEAT ALL" appears on the display.
RANDOM PLAY
When the RANDOM/INTRO button is pressed, the "RAND" indicator will appear on the LCD display. The tracks on the disc will
be played in random order automatically.
Cancel Random Play:
Press RANDOM/INTRO until the "RAND" indicator disappears.
NOTE:
Pressing the button during random play will initiate a skip to the track selected next by random operation. On the other hand,
the button does not allow you to select the previous track.
Random Intro Normal
  
INTRO PLAYBACK
1. Press RANDOM/INTRO on the remote control. The "INTRO" indicator will appear on the display. The unit will play only the
first 10 seconds of each track (intro).
2. Press RANDOM/INTRO on the remote control again to resume normal playback.
NOTE: The following is only functional by using the remote control.
This function allows the tracks to be played in a programmed sequence. The user can program up to 32 tracks in CD mode or
99 tracks in MP3 mode.
NOTE: This program can only be set in STOP mode.
1. Press the PROG. button on the remote control, "P01" and "PROG" appear on the display ("P01" will be shown if you are
programming for the first time).
2. Use the or button on the main unit or the remote control to select the desired track. The track number will appear
on the display.
3. Press the PROG. button on the remote control to store the selected track in the memory, the program number will
advance one (i.e."P02") on the display.
4. Repeat steps 2 to 3 to store more tracks. You can store up to 32 CD tracks or 99 MP3 tracks. Display will show "FUL" after
tracks have been programmed and memory is full.
5. Press PAUSE/PLAY on the main unit or the remote control to start playing the CD in the programmed sequence.
6. Press the REPEAT button on remote control to select Repeat 1/All if desired.
7. To stop play, press the STOP ◼ button on the main unit or on the remote control.
8. To cancel the program altogether, press the STOP ◼ button on main unit or remote control twice. The "PROG" icon will
disappear from the display.
or button to search within the current track with audible high speed playback.
 

or button.
or SKIP PREVIOUS button to go to the next track or go back to
8