How To Use - Lionelo Pascal Manual De Usuario

•
Power terminals should not be short-circuited.
•
The batteries must be inserted with the correct polarity.
The sound and vibration module needs two LR6 alkaline batteries to operate.
These batteries are not part of the set.
Product description (fig. 1)
1. Left skid of the chair
2. Right skid of the chair
3. Sound and vibration module
4. Rear part of the seat frame with a rocking lock
5. Left part of the seat frame
6. Right part of the seat frame
7. Covering
8. Rear part of the seat frame with a height adjustment
9. Bow with toys
10. Bow with toys
11. Rocking lock
12. Chair folding key
13. Seat height adjustment
Sound and vibration module:
A. Change volume
B. Change melody
C. Vibration on/off
D. Module on/off

How to use

1. How to assemble the reclined cradle
•
Insert the left and right skid of the reclined cradle (1,2) in holes in the sound
and vibration module (3) (fig. 2). If you can hear a „click", it means the skids
have been secured properly.
•
Slide both skids (1,2) in holes in the rear part of the frame (4) (fig. 3). If you
can hear a „click", it means they have been secured properly.
•
Slide both parts of the seat frame (5, 6) in holes in the covering (fig. 4).
•
Next slide both seat frames in holes in the upper part of the sound and
EN ‑ 8 ‑