Optional Accessories - Tripp-Lite N785-I01-SFP-D Guia De Inicio Rapido

Optional Accessories

• N001-Series Cat5e Snagless Ethernet Cables
• N201-Series Cat6 Snagless Ethernet Cables
• N286-Series Transceivers
Installation
Notes:
• The following installation instructions refer to an installation in which two media
converters are used.
• To avoid damage due to Electrostatic Discharge (ESD), it is recommended you
handle the product while wearing an ESD wrist grounding strap or by touching
a conductive surface (such as metal) to discharge any potential ESD prior to
handling the product.
1
Connect the RJ45 port on the media converter to your network with a
user-supplied Cat5e/6 cable.
2
Connect a transceiver to the open SFP port on the media converter.
3
Connect fiber cabling matching the transceiver type to the
transceiver's port and to a second media converter with a matching
transceiver.
4
Connect the RJ45 port on the second media converter to your
network device (workstation, hub, switch, etc.) using a Cat5e/6 cable.
5
Connect 20~57VDC power properly to PWR and RPS (Terminal
Block). Connect Alarm Relay output (ALM) to Alarm System.
21-07-114 93-3F8C.indb 3 21-07-114 93-3F8C.indb 3
5 1
5
2
3
3
4
6/8/2022 12:45:25 PM 6/8/2022 12:45:25 PM