Optional Accessories - Tripp-Lite N785-H01-SCMM Guia De Inicio Rapido

Optional Accessories

• N001-Series Cat5e Snagless Patch Cables
• N201-Series Cat6 Snagless Patch Cables
• N306-Series Duplex Multimode 62.5/125 Fiber Patch Cables (SC/SC)
• N356-Series Duplex Singlemode 9/125 Fiber Patch Cables (SC/SC)
• N286-Series Transceivers
• N785-CH12 12-Port Chassis for N784/N785 Media Converters
Installation
N785-H01-SCMM and N785-H01-SCSM
Notes:
• The following installation instructions refer to an installation in which two media
converters are used. A single media converter can be used for a copper-to-
fiber installation.
• The following installation instructions refer to the N785-H01-SCMM.
Connections are the same for the N785-H01-SCSM, with only the specs being
different. See the Specifications section in this manual for details on your
media converter.
• To avoid damage due to Electrostatic Discharge (ESD), it is recommended you
handle the product while wearing an ESD wrist grounding strap or by touching
a conductive surface (such as metal) to discharge any potential ESD prior to
handling the product.
Network
Network
1
Power Source
Power Source
1
Connect the RJ45 port on the media converter to your network with a
user-supplied Cat5e/6 cable.
Network
2
4
3
Network Device
Network Device
3
4
Power Source
Power Source
Network Device