Luisi Air SANREMO Instrucciones De Uso Y De Montaje página 19

WARNING
Connecting the product to
the mains electricity must
be carried out by technical-
ly qualified and specialised
personnel.
The product must be con-
nected to an electrical sy-
stem correctly designed and
installed.
The electrical system must
comply with VDE0100 stan-
dard.
DANGER
If the product shows signs
of a fault, disconnect the
appliance or remove the
fuse corresponding to the
disconnection line of the ap-
pliance.
SANREMO
EN
If the product is not provided with a plug or if the
plug is not easily accessible, it will be necessary
to install a thermomagnetic circuit breaker switch
on the electricity line between the product and
the electrical system to which it is connected to
that has a contact aperture of the poles of at least
3mm.
19