Pur Line VENTY IND 90 Manual De Instrucciones página 9

PARTS
1
2
3
ASSEMBLY
1. Place the tubular U-bracket on a flat surface.
2. Fit the fan body into the bracket and fix it with the side fixing screws.
OPERATION
1. Adjusting the air flow speed
By turning the speed switch, the fan can be set to operate at 3 different speeds: low, medium, high.
2. Angle adjustment
The vertical angle can be adjusted manually.
The fan must be switched off before changing the angle.
CLEANING AND MAINTENANCE
· Unplug the appliance before cleaning.
· Use a soft cloth to clean the appliance. Do not use solvents or harsh chemicals. Never use direct
water.
· Do not clean with metal sourcing pads. It may scratch the surface or cause electrical shock.
END OF SEASON STORAGE
Switch off and unplug the unit.
It is recommended to store the unit in it's original carton. Do not stack heavy objects on top of the
unit.
EN
7
1. Main body
2. Side fixing nut
3. Bracket