Withings BPM Connect Guía De Producto página 7

Maintenance
If you cannot fix the problem using the troubleshooting
instructions, request service from your dealer. The manufacturer
will make available on request circuit diagrams, component
part lists, descriptions, calibration instructions, or other
information that will assist the manufacturer's staff or authorized
representative with repair. Do not use the device while doing
maintenance steps.
Storage
- Store the device and the components in a clean and safe location.
- If storage conditions are different from the usage conditions
indicated in this document, please wait 30 minutes before
taking a measurement.
Error message and Troubleshooting
Error Causes and solutions
Err. 201 The cuff was not properly tightened. Please try to take a
new measurement and make sure you follow the guidelines.
Err. 202 Talk or movement has been detected during the
measurement. Please try to take a new measurement
and make sure you follow the guidelines.
Err. 203 No heart rate has been detected. Please try to take a new
measurement and make sure you follow the guidelines.
Err. 204 Error calculating blood pressure. Please try to take a new
measurement and make sure you follow the guidelines.
Err. 301 BPM Connect is not inflating correctly. Please try to take
a new measurement and make sure you follow the guidelines.
Err. 302 Contact the customer support.
Err. 303 BPM Connect failed to start a measurement. Please try to take
a new measurement and make sure you follow the guidelines.
Err. 205 Heart rate measurements are outside of the 40-180 bpm
range the BPM Connect is certified to measure.
As such, a low heart rate can result in this error message.
Err. 206 The measurement has been stopped manually.
Err. 220 Battery level is too low. Please charge BPM Connect using the
provided charging cable before taking a new measurement.
EN
6 – 7
FR
DE
SV
NL
FI
DA
IT
ES
CS
PL
PT
RO
HU
SK
ET
EL
IS
LV
LT
SL
TR
BG
HR
NO