Technical Specifications - Eaton Indu Tel Instrucciones De Servicio

Technical Specifications

Connection data:
Supply voltage
Supply current
Ringing alternating current
Ringing frequency
Sounder input impedance
Enquiry key (flash)
Dialling procedure
DTMF
PD
Ringing volume
Housing
Height x Width x Depth
Weight (Telephone
incl. telephone bracket)
Operating utilization position
Receiver
Mouthpiece
Receiver inset
Connections
Labelling
Power cable
Secondary Sounder
Ambient operating temp.
Transport and storage temp.
Degree of protection acc.
to IEC60529
Cable gland
for cable diameters
24...66 Vdc
19... 100 mA
30...90 Vac
16.. 68 Hz
≥ 6.0 kΩ at 25 Hz
≥ 3.5 kΩ at 50 Hz
only for DTMF 80 ms, 120 ms, 600 ms
Frequencies according to ITU-T Q.23
Tone duration unlimited or 90 ms
Pulse/Pause ratio
1.5:1 (60/40 ms) or
2:1 (66.7/33.3 ms)
when the housing cover is open
Approx. 90 dB(A) at 1 m distance
when the housing cover is closed
Approx. 65 dB(A) at 1 m distance
330 x 237 x 110 mm
2.3 kg
Vertical wall mounting
Electret-foil microphone
dynamic receiver
Single- or multiwired up to 2.5 mm
TCP/La – TCP/Lb (TCP: Terminal Connection Point)
W – W1
-40°C...+55°C
-40°C...+70°C
IP 66
2x M16 x 1.5
5 ÷ 9 mm
2
15