Operation With Active Phone Lock; Changing The Phone Settings; Signal Tones - Eaton ResistTel MB Instrucciones De Servicio

Operation

Operation with active phone lock

In case of active phone lock the dialling is limited or completely blocked.
If the blocked keys are still pressed, the phone generates the signal
"error tone".

Changing the phone settings

The phone is fitted with a programmable memory which permanently
stores the settings like dialled numbers, volume settings, time data etc.
These settings are adjustable to ensure that the phone can be adapted
to diverse operating conditions.
All adjustable settings of the phone configuration are presented in the
Configuration section below.
i) All modifications are made by pressing the
same time.
The setting is selected for modification with the ii) buttons, and the
settings range if shown by the symbolic name iii).
The additional row v) contains the list of buttons which can be used
here.
If pressing the iv) buttons * and 0 at the same time, the configuration is
ended and the modified settings are stored in the memory.
The symbolic name is enclosed with { } brackets, and 0, 1 or several
buttons of the list v) can be pressed, otherwise the user can press
exactly one button.

Signal tones

_______ Acknowledgement sound
_ _ _ _ Error sound
_ Indication sound, selected speed dialling memory is not
empty
PIN-Ping, Request to introduce the PIN number
and buttons at the
15