Ce Symbol - Eaton ResistTel MB Instrucciones De Servicio

performed under power, they can only be performed by
professionals.
8. Requirements on the position of the device must be met. The device
can only be mounted vertically on a flat area.
9. Power frequency magnetic fields can have a slight influence on the
sound quality. Please take care to select the correct place of
installation in this case.
10. Dust must not enter the device while it is open!
11. The cover seal and the collar of the lower part of the housing
required for the tightness of the housing cannot be damaged during
assembly or disassembly.
12. A rust film can form in case of a high concentration of sulphurous
gases in the air.
13. We reserve the right to modify the product for its technical
development without preliminary notice.

CE symbol

We hereby declare that this product is in compliance with the
essential health and safety requirements
EMC Directive 2014/30/EU,
Low Voltage Directive 2014/35/EU
The product complies with RoHS 2011/65/EU and the delegated
directive (EU)2015/863
The product is compliant with RoHS Regulation 2011/65/EU, the
latest amendment RoHS 2017/2102 and the extension according
to EU Official Journal L 148 page 72-87 without any exception.
The relevant standards, technical rules and specifications can be
found in the attached Declaration of Conformity and the
Declarations of Conformity on our website.
25