Jabra GN 7100 Manual Del Usuario página 4

• The last number dialled is automatically saved in the memory.
To redial: Press the On/Off button to connect and then the Redial button.
To check the last number dialled: Press the On/Off button. Then press the Memory Check button followed by the
Redial button.
Muting the microphone
• To talk without the caller hearing you, press the Mute button on the telephone. You are still able to hear your caller.
When the microphone is muted, the indicator next to the button lights up.
Displaying contents of redial
• Press the On/Off button to connect the telephone. Press the Memory Check button and then the Redial button.
One-touch buttons
• It is possible to save your most used telephone numbers into the memory buttons. You can then call the numbers by
pressing one button only.
There are three ways of storing numbers.
A Store number while disconnected
• Press the On/Off button
• Press the Store button
• Dial telephone number (* & # can be included, but not R)
• Press the Store button again
• Press M1, M2, or M3
• Press the On/Off button again to disconnect
B Store number while dialling
• Press the On/Off button
• Dial phone number (* & # can be included, but not R)
• Press the Store button
• Press M1, M2, or M3
• Press the On/Off button again to disconnect
C Store number from redial content
• Press the On/Off button
• Press the Memory Check button
• Press the Redial button
• Press the Store button
• Press M1, M2, or M3
• Press the On/Off button again to disconnect
Displaying one-touch numbers
• Press the On/Off button followed by the Memory Check button. Press M1, M2, or M3 to display the stored number.
(*, #, and R appear differently in the display)
Calling one-touch numbers
• Press the On/Off button and wait for dial tone. Press M1, M2, or M3.
Deleting one-touch numbers
• The stored numbers cannot be deleted. The number can be changed by following one of the procedures for storing
numbers. Alternatively, store the number as a 0.
All manuals and user guides at all-guides.com