Jocel JTDSZF20LJ-80L Manual De Instruciones página 24

− If the above-mentioned operations still can't let the whole unit put through the power
and work normally, which indicates the water temperature in the tank is still over-high.
Please open the water exiting valve and pour out the heat water for several minutes,
then repeat the above mentioned procedures after waiting the water temperature
reduces.
− In order to ensure the efficiencies of electricity-leakage protection function, you can
press the testing button once every week. At this time, the position- resetting button will
kip up. Then make the position-recovery button press down, it will immediately resume
the normal operations.
THE PRODUCT'S FEATURES
− Unique Profile: Fashionable personalized design, leading the market's new tide.
− Inner tank protection by Blue/Ultra diamond Enamel Coating & Magnesium Anode.
More advanced with high efficiencies & longer longevity.
− High efficiencies energy saving & temperature maintaining heat isolation layer:
Adopting the thickened non-fluorine amine-gathering resin whole body's bubble-
making heater isolation layers, good temperature-keeping performance. Reducing the
heat loss with the maximum degrees. Under the electricity cutting off and temperature
keeping conditions, still exiting efficiencies the hot water for provisions within 48 hours.
− Power 2000W.
SECURITY CHARACTERISTICS
− Security Valve: This electrical water heater fits a mono-directional security valve. lt
must be installed at the water entering hole sector of this unit of the electrical water
heater. When the tank's pressure is over 0.8 MPa, this valve will automatically leak the
pressure.lt may exist the water drops to fail down at the pressure leakage mouth
sector. ln any conditions, this pressure leakage mouth must not to be blocked. You
must keep it anti-through with the atmosphere. (Diagram 1)
Note: For the interior-ventilating styled security valve, its pressure leakage exit sector
may not exits the water drops to drip down. Otherwise, during the heating procedure,
the water-entering pipe's outer cover under the safety valve may have a certain
temperature. This belongs to the normal conditions. This indicates that it is internally-
draining the leakage pressure.
− If need to make the tank empty, first close the water-entering valve door, open the
water-exiting valve door. Then tear down the fixed screw nails on the security valve
with tools. Make the plastic handle Iift up; let the water in the tank natural1y flow out.
(Diagram 2).
All manuals and user guides at all-guides.com
-23-