BURG-WACHTER Scan & Lock 610/53 Manual De Instrucciones página 11

Open with fingerprint
Note: At the factory and in delivery condition, the lock can be opened
with any fingerprint. The lock is individualised when it is set by the
administrator.
To activate, press the shackle
1x upwards (Fig. 1).
„Blue" flashing
1. Press shackle once
Set administrator account
„Blue" flashing
1. Press shackle once
„Blue" flashing
3. Input administrator
fingerprint 10 times
Scan & Lock 610 / 53
To open: place your finger
on the sensor (Fig. 2).
„Blue" shining,
with 4 beeps
2. Press fingerprint pad
around 1s
„Blue" shining,
with 3 beeps
2. Press fingerprint pad
around 3s
„Blue" shining
„Red" shining
„Blue" shining:
Successful (with a long
beep)
„Red" shining:
Failed (with 4 beeps)
English I 11