Before You Ride Safety Checklist - Roadmaster CRUISER Manual Del Propietário

BEFORE YOU RIDE SAFETY CHECKLIST

Before every ride, it is important to carry out the following
safety checks. Do not ride a bicycle that is not in proper
working condition!
Accessories
□
The reflectors are properly placed and not obscured. Note:
Bicycles 16" and under may not be equipped with reflectors
since small children should not ride at night.
□
All other fittings on the bike are properly and securely
fastened, and functioning.
□
The rider is wearing a properly fitted helmet (protective gear
if necessary) and that clothing and loose items are properly
constrained.
Bearings
□
All bearings are lubricated, run freely and display no excess
movement, grinding or rattling.
Brakes
□
The front and rear brakes work properly.
□
The brake shoe pads are not overly worn and are correctly
positioned in relation to the rims.
□
The brake control cables are lubricated, correctly adjusted
and display no obvious wear.
□
The brake control levers are lubricated and tightly secured
to the handlebar.
All manuals and user guides at all-guides.com
Chains
□
Cranks and Pedals
□
□
Frame and Fork
□
□
Steering
□
□
□
Wheels and Tires
□
□
□
□
The chain is oiled, clean and run smoothly.
The pedals are securely tightened to the crank arms.
The crank arms are secured to the axle and are not bent.
The frame and fork are not bent or broken.
The quick-release clamps are locked in place.
The handlebar and post are correctly adjusted and
tightened, and allow proper steering.
The handlebars are set correctly in relation to the forks and
the direction of travel.
The handlebar binder bolt is tightened.
The rims do not have dirt or grease on them.
The wheels are properly attached to the bicycle and axle.
The tires are properly inflated within the recommended
pressures displayed on the tires sidewall.
The tires have the proper amount of tread, no bulges or
excessive wear.
Safety 1
13