Adjustments; Tools Required - Roadmaster CRUISER Manual Del Propietário

4 Adjustments

Adjustments
❹
After your bicycle is assembled you will need to make
adjustments. If you need replacement parts or have questions
pertaining to the assembly of your bicycle, call the service line
direct at: 1-800-626-2811. Monday - Friday 8:00 am to 5:00 pm
Central Standard Time (CST).
Note: You will need your model number and date code located
on the service sticker near the bottom bracket area. Figure 4.1
Service sticker is
located above the
bottom bracket
The serial number
is located below
the bottom bracket
30
All manuals and user guides at all-guides.com

TOOLS REQUIRED

• Phillips head screw driver
• 2.5 mm, 4 mm, 5 mm, 6 mm and 8 mm Allen wrench
• Adjustable wrench or a 9 mm, 10 mm, 14 mm and 15 mm
• A pair of pliers with cable cutting ability
Figure 4.1
open and box end wrenches
Figure 4.2